Owner`s manual
26
Maintenance
The reliability and correct functioning of your equipment
depends on the care it receives.
Post Dive BC Cleaning:
• Rinse the BCD thoroughly with fresh water after each use.
• Rinse the inside of the bladder using the Bx Coupler. Simply unscrew the
Bx Coupler from the Power Inator, and screw onto a standard garden
hose.
Turn the water on and super rinse and clean the inner bladder.
• Hang the BCD upside down and allow it to dry while partially inated.
Drain any residual water through the exhaust hose while the BCD is
hanging upside down.
• Store the BCD partially inated in a cool dry place.
When screwing on the Bx Coupler to the garden hose,
DO NOT OVER TIGHTEN.
Some water leakage here is normal during rinsing.
Over tightening may cause damage to the coupler.
Bx Coupler
Bx Coupler
Standard Garden Hose
Standard Garden Hose