Owner`s manual
8
Proper Fit
The Zeagle Personal Fit System allows the diver to size each component of
the buoyancy system independently, for a true custom t. For proper
performance, please be sure that your system ts as described below. Put
the BC on (before attaching it to a SCUBA cylinder) and adjust the shoulders
and waist as follows.
1. Loosen the shoulder straps before
donning. Put it on like you would a
jacket. If your system is equipped with
cummerbund side panels, stretch the
elastic by extending each side panel as
far as possible before wrapping it around
you and fastening the Velcro.
3. Fasten the sternum strap. It should
be just above the breast line. If you
are wearing a dry suit, be sure that the
sternum strap does not obstruct the
drysuit inator hose or valve. There are
two sets of loops for the sternum strap.
If the sternum strap is too high, the strap
can be moved to the lower loops.
2. The system should be worn low with
the bottom of the vest at the top of your
hips. Once the cummerbund side panels
are secure, fasten the waist strap and
tighten it snugly.
4. Adjust the shoulder straps.
Fitting and Assembly