Installation Instructions

SP230/SP230-S5 2x2 PtP/PtMP 802.11ac Wave 2 Access Point QSG
58-140007-IQN _V1.0 Page 2
Two-dimensional Mounting Kit (Optional accessory_SP-MKM5)
Pole-Mount

Attach the
i
ntermediate
s
teel
p
late to the
device using four M5 screws (included in the
packaging). Securely tighten the screws.

Attach the
t
wo
-
dimensional
m
ounting
bracket to the intermediate steel plate using
four M4 screws (included in the packaging).
Securely tighten the screws.

Attach the
p
ole
-
supported
b
racke
t and align the area where the
f
lat head screw
s will be
attached. Insert two flat head screws into two-dimensional mounting bracket, and tighten
them approximately.
Note: The pole-supported bracket can accommodate up to 6 cm (2.36”) in diameter.
Wall-Mount

Separate it into two parts:
h
alf
-
mounting
bracket and M-type bracket and unscrew
four hex head machine bolts on the two-
dimensional mounting bracket.

Attach the
i
ntermediate
s
teel
p
late to the
device
using four M5 screws (included in the
packaging). Securely tighten the screws.

Attach
h
alf
-
mounting bracket to the
device
with intermediate steel plate using four M4

Attach M
-
type bracket to the
device
onto the
wall, using four M5 screws + screw anchors