Quick Setup Guide

Specifications
Specifications
Dimensions 310 x 305 x 94 mm
Weight 1.4 kg
Networking Interface (2) 10/100/1000 Ethernet Ports
Buttons (1) Reset to Defaults
Antennas (2) 5GHz 15dBi Antennas
Wi-Fi Standards 802.11 a/n/ac
Power Method 802.3 af /at (PoE/PoE+)
Power Supply 48V, 0.5A PoE
Max. Power Consumption ≤ 20W
BSSID Up to 8 per Radio
Wireless Security
WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2,
TKIP/AES)
Certifications CE, FCC, NCC
Mounting Wall/Ceiling(Kits Included)
Operating Temperature
-40 – 70 ℃
Operating Humidity 10 to 90 % Non-condensing
Safety Notice
1. Do not install the device close to any
electrical grounding device or lightning
protection system. Place the device’s own
grounding and lightning protection system
apart from any electrical grounding device
and lightning protection system as far as
possible.
2. Protect components from electrostatic
discharge: Please wear an ESD wrist strap
or handle the power adapter by its edge
and do not touch any component or
printed circuit boards, especially for
module device.
3. Make sure to keep the temperature and
humidity of the installation location at an
optimal level.
4. An excellent grounding system guarantees
the stable operation of device, as well as to
protect device from lightning, interference
and electrostatic discharges.
5. If installed open site area, the device may
be damaged by lightning. We recommend
that you install additional lightning
protection devices if necessary, considering
the conditions in your area.
6. Supply stable power to the device.
Unstable power may cause the device to
malfunction. The device supports PoE
power supply and is recommended if the
device is installed near grid lines within
less than 100 meters radius.
The antennas used for this transmitter must
be installed to provide a separation distance
of at least 20 cm from all persons and must
not be located or operating in conjunction
with any other antenna or transmitter.
Compliance Information
RF Exposure Warning
CE Marking
Note:
This device meets Max. TX power limit per
ETSI regulations.
CE marking on this product represents the
product is in compliance with all directives
that are applicable to it.
RoHS/WEEE
Compliance Statement
European Directive 2012/19/EU requires that
the equipment bearing this symbol on the
product and/ or its packaging must not be
disposed of with unsorted municipal waste.
The symbol indicates that this product should
be disposed of separately from regular
household waste streams. It is your
responsibility to dispose of this and other
electric and electronic equipment via
designated collection facilities appointed by
the government or local authorities. Correct
disposal and recycling will help prevent
potential negative consequences to the
environment and human health. For more
detailed information about the disposal of
your old equipment, please contact your
local authorities, waste disposal service, or
the shop where you purchased the product.