User's Manual

Wireless Extenders YX500-PCS
13
Installation Guide
Mode
LED Settings
Action
User Shutdown
Power LED = Off
Signal LED = Solid Red
Install LED = Off
User’s phone/device is too
close to the Base Unit. The
Base Unit has temporarily shut
down to prevent network
problems.
Network Caution
– Reduced
Range
Power LED = Solid Green
Signal LED = Flashing Red
(20 seconds)
Install LED = Flashing Red (20
seconds)
The Signal Antenna is
receiving a strong signal from
a nearby cell tower (probably
another service provider) and
is operating with reduced
range. Try making one or
more of the following
adjustments:
1. Position the Signal Antenna
so that it is pointing in the
direction of the closest tower.
2. Move the Signal Antenna to
another part of the attic.
3. Contact a professional
installer for assistance. You
may need to have a directional
antenna installed.
Network
Overdrive –
Base Unit
Shutdown
Power LED = Off
Signal LED = Solid Red
Install LED = Solid Red
The Signal antenna is
receiving too much signal from
a nearby cell tower (probably
another service provider. Try
one more of the following to
correct the problem:
1. Slightly adjust the position
of the Signal Antenna so that it
is pointing toward the closest
tower.
2. Move the Signal Antenna to
another part of your attic.
3. Contact a professional
installer for assistance. You
may need to have a directional
antenna installed.