User's Manual

Wireless Extenders YX500-PCS
11
Installation Guide
4. Holding the Base Unit, adjust its position on the
wall until the LEDs shine a steady green. The
Base Unit can be mounted on the wall with the
antenna pointing to the ceiling or towards the
floor.
5. Attach the self-tapping wall/ceiling anchors to
the wall and attach the Base Unit.
6. Turn on your cell phone and check the signal
strength. You should now have wireless where
you want it.
Note:
If you are unable to position the Base
Unit so that the LEDs shine a steady
green, you may have to move the Base
Unit to another wall in the room.