User's Manual

10
Wireless Extenders YX500-PCS
Installation Guide
2. Attach the antenna to the Base Unit and
position it so that it is at a 90 degrees angle to
the Base Unit.
3. Set the Base Unit on a furniture piece.
4. Plug the Base Unit’s power supply into a wall
outlet.
5. Turn your on your cell phone and check the
signal strength. You should now have wireless
where you want it.
Note:
If you are unable to position the Base
Unit so that the LEDs shine a steady
green, you may have to move the Base
Unit to another location in the room, or
mount it on a wall.
Wall Mount
The Base Unit can also be easily mounted on a
wall using the included mounting bracket hardware.
Perform the following steps to mount the Base Unit
on a wall:
1. Attach the coaxial cable, which should already
be attached to the Signal Antenna, to the Base
Unit.
2. Attach the power supply cable to the Base Unit
and plug the power supply into an outlet.
3. Attach the antenna the Base Unit.