User's Manual

Wireless Extenders YX500-PCS
9
Installation Guide
and connectors.
Installing the Base
Unit
For the widest possible signal reception, it
recommended that you install the YX500-PCS
Base Unit in the middle of a room or on an interior
wall. This is because the Base Unit uses an omni-
directional antenna, which like a lantern delivers
the signal in a circular pattern around the antenna.
The Base Unit can either be directly mounted on a
wall or set on a furniture piece (e.g., a bookshelf,
desk, filing cabinet, end table etc.). The Base Unit
performs best when positioned four feet above the
floor.
Placing the Base Unit on a Piece of Furniture
The Base Unit is designed so that it easily sits on
the flat surface of a furniture piece. With a design
that is very similar to a cordless phone base
station, the Base Unit easily blends into any room.
Perform the following steps to position the Base
Unit on a furniture piece:
1. Attach the coaxial cable, which should already
be attached to the Signal Antenna, to the Base
Unit.
Figure 2 - Attach power and coaxial cables to the Base
Unit
{Malcolm Fontier Cad illustration showing power and
coaxial cables attached to base unit}