User's Manual

8
Wireless Extenders YX500-PCS
Installation Guide
{ insert picture of Signal Antenna and mounting
parts}
photo
Using the supplied mounting parts, install the
Signal Antenna. For the best signal reception, the
antenna should be installed at the highest possible
point in your attic.
{insert picture of attic installation}
1 drawing – inserting wire into base
with exploded view of screws;
2
nd
drawing – attaching antenna to a mast
3
rd
drawing – show Signal Antenna mounted to
wood beam and antenna mounted to mast.
Do not tightly secure the Signal Antenna until you
have connected the coaxial cable to the Base Unit
and made sure it is working properly.
Running the
Coaxial Cable
After installing the Signal Antenna, connect the
coaxial cable to the antenna and run it to the
location in your home where you plan to install the
Base Unit. It is highly recommended that you
refrain from securing your cable, drilling any holes,
etc. until you complete and test the installation of
the Base Unit.
Note:
If the distance from the Signal Antenna to
the Base Unit exceeds 35 feet, you will
need to purchase additional coaxial cable