User's Manual

Wireless Extenders YX500-PCS
7
Installation Guide
coaxial cable will be required. For the best
performance, The cable length should not
exceed 60 feet.
Power
Requirements
The Base Unit can be plugged into a standard 2-
prong 110 VAC receptacle using the supplied
power supply.
Warning:
The YX500-PCS base unit should only
be used with the supplied power cable.
Attempts to use other power cables will
void the warranty.
Installation Tools
The following tools are required to install the
YX500-PCS:
• Nn-size wrench
• Nn-size [Philips-head] screwdriver
• Standard drill with nn” bit (optional)
• PCS Cell phone operating at1900 MHz
• Multi-meter for testing electrical continuity and
AC line voltage (for troubleshooting only)
Installing the YX500-PCS
Installing the
Signal Antenna
Once you have confirmed that you have a cellular
signal either outside your home or inside your attic,
you are ready to install the Signal Antenna.