User's Manual

Wireless Extenders
7
YX500-CEL Installation Guide
Figure 4 – Signal Antenna and Mounting Bracket
Signal Antenna Mounting to an Attic Cross Beam
1) Identify the wood beam where you will attach the mounting bracket and drill
two holes. For the signal reception, install the Signal Antenna at the highest
possible point in your attic. Avoid placing the antenna within 3 feet (1 meter)
of metal objects (pipes, metal siding, A/C unit, etc.)
Figure 5 - Drill two holes for mounting bracket
2) Attach the mounting bracket so that when the Signal Antenna is attached, it
will stand perpendicular to the floor.