zBoost YX230 In‐Vehicle Cell Phone Signal Booster User Guide
DMAN‐0018 REV C zBoost YX230 User Manual Table of Contents 1. Package Contents ............................................................ 2 2. Important Safety Information .......................................... 2 A. Limited Warranty ....................................................... 3 B. Limitation on Liability................................................. 3 C. FCC/IC Regulations .................................................... 3 3. Electrical Specifications ..............................
IMPORTANT! Read instructions completely before installation. 1. Package Contents YX230 Part Number DMAN‐0018 APRD‐0010 CANT‐0019 CANT‐0018 CCBL‐0014 Description Installation Guide zBoost In‐Vehicle Amplifier Unit Interior Patch Antenna Exterior Magnetic Mount Antenna 12V DC Cigarette Lighter Adapter Record the serial number found at the bottom of your zBoost YX230 Car Extender for future reference: Serial #_______________________________________ 2.
A. LIMITED WARRANTY – LIMITED WARRANTY ‐ The Wi‐Ex System by Wireless Extenders, Inc. warrants to the purchaser for a period of one (1) year from the date of purchase, but in no event longer than two (2) years from the date of manufacture, that its products identified above under Package Contents and sold hereunder will at the time of shipment be free from defects in material and workmanship and will conform to Wi‐Ex specifications stated in this manual.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and the operator’s body. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. IC: 5544A‐YX230 The manufacturer's rated output power of this equipment is for single carrier operation.
4. Portable Installation Step‐by‐Step Guide Note: Before installing the zBoost Car Extender, please read the entire contents of this Installation Guide.
WARNINGS The YX230 complies with FCC/IC regulations. Follow all guidelines and read this information completely before beginning the installation procedure. Never operate the system in an unintended application. All cellular phones in the vicinity of the Amplifier should be turned off during installation. Only after unit is installed should cellular phones be turned on and tested with the system.
Step 4. Attach DC Power Cable ‐ Attach small end of the 12V DC Power Cable to the Amplifier Unit. Insert the remaining end of 12V DC Power Cable into a 12V (cigarette lighter) Port within vehicle. NOTE: To avoid draining battery, when the ignition is off, check that Amplifier is not receiving power with vehicle turned off. The Amplifier’s LED should be off when the vehicle is off. To turn off Amplifier, depress the switch on 12V DC CL Adapter. Step 5.
5. TECHNICAL SUPPORT Locate the Wi‐Ex Car Extender serial number on the bottom of the Amplifier Unit before calling. The serial number must be available to authorize technical support and/or establish a return authorization. For installation technical support, contact your dealer. For system warranty issues, contact Wi‐Ex Support between the hours of 8:30 AM and 5:30 PM EST, Mon‐Fri, at 1‐800‐871‐1612 or visit our technical support website at http://www.wi‐ex.com.
First, waiting 10‐20 seconds is required before some phones show an increase in the signal strength. Second, make sure the Interior Patch Antenna is facing the user and is within 2‐4 feet. Make sure the Antennas are connected to the Amplifier Unit. I need a technical support specialist – Call 1‐800‐871‐1612 to reach one of our highly trained, technical experts. I need to return the unit – Call 1‐800‐871‐1612 to request a Return Authorization number.
