Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

Extended Menu

Navigating the Extended Menu

• Press and hold the MENU key while powering up the unit.

• Pressing the MENU key will advance you to the next menu item.

Exiting the Extended Menu

• Cycle the power

• Hold down the MENU key to get back to the EXTENDED MENU home page then press the INC key.

High Pass Filter Adjust

This menu turns on and adjusts the frequency of the high pass filter.

• The high pass filter range is 30Hz to 220Hz in 10Hz increments.

Limiter

This menu enables/disables and adjusts the limiter. The limiter is pre analog to digital converter.

• Range: -2dB to -30dB in 1dB increments.

When the input signal is too high the audio can clip and results in distortion and popping. The limiter

can be used to prevent clipping.

2K Notch Filter

This menu enables/disables the 2K notch filter.

The 2K notch filter is useful in removing digital RF interference that can be introduced into the

microphone.

HIGH PASS: OFF

Level when the limiter will act.

LIMITER: OFF

LIMITER: -10dB

FROM FULL SCALE

2K NOTCH FILTER

OFF