Specifications

Zaxcom TRX-900LT Series Manual Main Menu
6
Main Menu
Navigating the Main Menu
• Press the MENU Button to enter the menu.
• To advance to the next menu press the MENU Button again.
Exiting the Main Menu
• To exit the menu at any time press and hold the MENU button for 1.5 seconds
Audio Gain
This menu sets the gain of the incoming audio. The meter indicates the audio signal displayed horizontally
from left to right. The TRX-900LTS/LTHS set to stereo mode will display two meters - one for each channel.
The gain in stereo mode is applied to both sources.
UHF Transmit Frequency
This menu sets the UHF transmit frequency of the transmitter.
• Short presses of the INC or DEC key causes the value to change by 0.1 MHz.
• Holding the INC or DEC key causes the value to change by 0.5 MHz.
Transport Control
This page displays the transport status of the transmitter.
The top line displays the current mode: REC, PLAY or STOP followed by the timecode.
The bottom line contains the segment number and the audio level.
Playing back from the transport screen
• Pressing the INC key while stopped will play the segment that is displayed.
• Pressing the INC key while in play mode will fast forward.
• Pressing the DEC key while playing back will stop the playback.
• Holding the DEC key while playing back will take you to the start of that segment.
• Pressing the DEC key while stopped will rewind.
GAIN 20dB
TXFREQ 567.4
STOP 01:02:34:01
001