Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

Name

This menu changes the name of the transmitter.

The name entered into the unit becomes part of the name of the audio files generated by the unit

and is also included in the metadata of the BWF file. Naming the unit aids in identifying the files

from several different wireless.

The maximum Name length is 8 characters. You can select any letter or number and can even use

spaces.

To set/change the name:

1. Press the INC or DEC key to change the character in the current position.

2. Press the MENU key to proceed to the next character.

3. When finished, press and hold the MENU key set the name and leave this page or you can

cycle the power.

Encryption Menu

This hides the Encryption Menu.

• HIDDEN the encryption menu doesn’t appear when you cycle through the menu settings.

• ON the Encryption will appear.

Encryption Code page

If you set an encryption code the transmitted audio will be encrypted and can only be listened to if

the receiver has the matching encryption code entered. When receiving an audio signal and the codes

do not match, all that will be heard is white-noise or silence.

These two sets of numbers are formed into a single six-digit encryption code which provides a total of

16,777,216 possible combinations.

To adjust the encryption code

1. Momentarily press the MENU key to advance to the next character.

2. To change the designated character, press the INC or DEC key.

3. To exit this page, press and hold the MENU key for 1 second.

NOTE: Both of these codes should always be set to 000 for normal un-encrypted operation.

NAME: SN1234

ENCRYPTION MENU:

HIDDEN

ID1:000 ID0:000