Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

Battery Type

This menu adjusts the battery type you are using so the receiver can properly display the remaining

battery capacity.

• The settings are NIMH, Lithium and Alkaline (Displayed as “ - - - -“)

Recording Mode

This adjusts what the transmitter will do after you reach the record capacity of the card.

• NON-LOOP RECORD (recommended setting) - Once the card has filled up, recording will stop and FULL

will be displayed. This prevents over-writing any portion of the audio.

• LOOP RECORD - Once the media has filled up, the new audio will begin over-writing the oldest audio on

the card.

Boot Up Mode

• REMOTE STANDBY – The transmitter boots up in Low Power Standby mode. The TRX900 will be waiting

for a ZaxNet “WAKE” command to come up to full power.

• STANDBY MODE – The transmitter boots up in Low Power Standby mode. The TRX900 will be waiting

for you to Press Menu to come up to full power.

• NORMAL MODE – The transmitter will boot up in Normal mode.

BATTERY TYPE:

NIMH QRX

RECORD MODE:

LOOP RECORD

NOTE: In the menu you will see “ENG” and “QRX” options for these battery types as well. This is so

each type Zaxcom receiver model“ENG” RX-900 or “QRX” QRX-100 can correctly display the

transmitter’s battery level.

BOOT UP IN

NORMAL MODE