Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

ZaxNet IFB Transmit Frequency

This is where you set the ZaxNet transmit frequency. This is the frequency that the transmitter will

broadcast timecode and ZaxNet audio on for the purpose of confidence audio monitoring via an ERX

receiver or Nomad. Note - the expected range will be less than 30 feet.

IFB Receive Pulse

– this menu will only appear if IFB is set to go into transmit mode.

This is where you set how often the transmitter will search for Timecode while operating.

When enabled this tells the transmitter to leave ZaxNet transmit mode once every XX seconds to go into

receive mode so it can re-jam its timecode wirelessly via ZaxNet. This has no affect on the UHF audio

transmission.

• The settings are NEVER or any interval between 10 and 999 seconds.

Power-Up Mode

This menu determines if the keys will lock after power-up.

• LOCKED – After power-up has completed, the transmitter will automatically go into Lock Mode to

prevent accidental changes to the settings.

• UNLOCKED – The keys are unlocked upon power-up. You can always lock the keys by going in to the

Lock Screen in the Main Menu.

Unlocking the Transmitter

Simultaneously press the MENU and INC keys.

POWER UP MODE:

LOCKED

NOTE: When the TRX-900 searches for TC it will temporally go out of transmit mode for approximately

1 second as it receives a TC signal.

Note:

You would need to use this setting if you

are monitoring audio via an ERX receiver and

you still want the transmitter to update TC

IFB RX PULSE:

NEVER

IFB RX PULSE:

600 SECS

IFB TX FREQ:

2.420