Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

IFB Receive Mode

This menu will allow the TRX to receive ZaxNet commands.

• OFF – The transmitter will not receive any ZaxNet commands

If this is set to OFF the next 5 ZaxNet menu items will not appear.

• RX- The transmitter will receive ZaxNet commands

IFB Voting Enable – this menu will not appear if the IFB settings allow the TRX to go into transmit mode.

This menu allows you to enable / disable the IFB Voting function.

The purpose of voting is to allow transmitter to choose and switch to the stronger signal from two

different ZaxNet transmitters. One purpose of this is if you are on a large set you can place a second IFB

transmitter at a different location and the TRX will choose the stronger signal. Just set the second IFB

transmitting frequency to exactly 2MHz higher than the first unit.

RXMODE=RX

NOTE: If the IFB RX to TX setting is set anything other than Normal you will not be allowed to set

this setting to OFF.

NOTE: This Page only will appear if you have the IFB RX TO TX mode set to NORMAL RX and RX MODE

is not set to OFF. Meaning that if the TRX-900LA/LAS IFB will ever be in a transmit mode IFB voting no

longer applies and will not be available.

IFB VOTING

NORMAL (OFF)