Specifications

Zaxcom Maxx User’s Manual Connector Pin Assignments
58
Connector Pin Assignments
Audio Input / Output Connectors (XLR-3)
XLR - 3 Signal
PIN 1
GROUND
PIN 2
SIGNAL +
PIN 3
SIGNAL
-
Tape / Mono Out - Uses a Switchcraft TA5-F
These outputs are assigned in the Bus routing Menu
Tape / Mono
Out of Maxx
PIN 1
GROUND
PIN 2
MONO SIGNAL +
PIN 3
MONO SIGNAL -
PIN 4 TAPE SIGNAL +
PIN 5
TAPE SIGNAL -
Return / Audio Inputs 5 and 6 -
Uses a Switchcraft TA5-F
The return can be wired to receive 2 mono returns from 2 cameras or one “stereo” return from one
camera.
Return into
Maxx
GROUND PIN 1
SIGNAL + Return 1 PIN 2
SIGNAL - Return 1
PIN 3
SIGNAL + Return 2
PIN 4
SIGNAL - Return 2
PIN 5
12 Volt DC power -
Uses Hirose HR10A-7P-4P
DC Power
In
PIN 1
GROUND
-
PIN 2 N/C
PIN 3 N/C
PIN 4
SIGNAL
+