Specifications

MAXX OPERATIONS Bus Routing

Pressing the Bus Key

Output Bus Assign Busses

This matrix assigns your Analog and Digital inputs to your output buses. The output busses can be assigned either pre

or post fade audio.

The top line of the three pages indicates the following sources:

• Analog Inputs 1-6

• T - Tone

• S - Slate

• D - Digital Inputs - only available when AES option is enabled.

Setting a Crosspoint

Rotate the MENU knob to scroll through the matrix. Stop in the matrix, at the intersection of the input channel and

output channel, where you want to send that specific input. Press the MENU knob to cycle through the available cross

points, which are:

• X – post-fader

• P – pre-fader

• X – post-fader, phase inverted

• P – pre-fader, phase inverted

NOTE: To add the optional phase invert items to the list, while in this matrix press the STAR key. Then by

pressing the MENU knob, you will now be able to cycle through the selections with phase invert.

Power cycling the unit will reset it to NO INVERSION mode but keep your phase invert choice.

Analog Inputs Tone Slate

Digital Inputs appear only on

Maxx with AES option.