Specifications

MAIN MENU Mode Menu
29
VFader Mode
This lets you choose to control the fader only or alternate between fader and trim for the inputs that you chose to be
active in the VFADER CYCLE.
When the virtual fader is active the bottom meter on the ENG screen will display what you will be controlling – either
fader only or fader and trim for an input channel.
Only the Faders will be controlled Both the Faders and Trim will be controlled
Pressing the MENU knob will alternate
between Fader and Trim control
This mode is only active while in the ENG Meter Screen.
When in this mode to control the faders for digital inputs 1 – 4 or faders and trim for analog inputs 5 and 6:
• Press the MENU knob and the bottom meter on the ENG meter screen will display what input will be controlled
with the MENU knob.
• If the Fader Icon is displayed the MENU knob will adjust the mix.
• If the Blue Trim Icon is displayed the MENU knob will control the input Trim of that input.
• Pressing the MENU knob will advance to the next item.
Folder Change
If set this to AutoChange, when the Primary Folder is changed, the Mirror Folder automatically changes to the newly
selected folder.
• None - Mirror folder will have to manually be changed to match the selected primary folder.
• AutoChange - When the primary folder is changed - the mirror folder will automatically change to the same folder.
NOTE: The Mirror Mode stills needs to be turned OFF before changing the Primary Folder.
AES Output Attenuation
This will attenuate the AES output level by the amount selected in the menu. The AES attenuation will allow you to take
full advantage of the dynamic range of the Never Clip inputs. The output attenuation works the same way as the ISO
attenuation on Maxx’s record tracks works.
The adjustable range is from 1dB to 20dB in 1dB increments.
FADER ICON
TRIM ICON
Input channel that
will be controlled