Specifications

MAIN MENU Mode Menu

NOTE: If you need to access the Main Menu from the ENG meter screen while the VFader mode is active, you will

need to press and hold the MENU knob for approximately 1.5 seconds.

Transport Keys

SHIFTED

If the TC, BUS or SETUP key is pressed, the items associated with those keys will open. To go into Record, Playback or

Stop, it is necessary to SHIFT those keys. You will need to press the MENU knob to “SHIFT” while simultaneously

pressing the REC, PLAY or STOP key to go into that mode.

NOTE: It is still possible to directly access the REC, PLAY and STOP functions by pressing the appropriate key for 1

second. This is the most popular choice for most users.

UNSHIFTED

Pressing the REC, PLAY or STOP key immediately puts Nomad into Record, Playback or Stop. To display the pages

associated with the TC, BUS or SETUP key, it is necessary to press the MENU knob while pressing the TC, BUS or SETUP

key.

VFader Cycle

Virtual fader will allow you to mix Analog inputs 5, 6 and the AES inputs right from the ENG Home screen.

If you activate “VFADER CYCLE”, you can adjust the mix for the AES inputs right from the ENG Home screen.

The MENU knob will become the hardware fader for those inputs.

VFADER CYCLE lets you choose which inputs (if any) you want to be able to mix in the ENG Home screen:

Inputs 5 and 6 are the analog return inputs.

• NONE

• 1 ONLY

• 1, 2

• 1, 2, 3

• 1, 2, 3, 4

• 1, 2, 3, 4, 5

• 1, 2, 3, 4, 5, 6

Shows which inputs will be

available when the Virtual

Fader is activated