Specifications

MAIN MENU Fader Assign

Fader Assign Matrix

This matrix controls which inputs are assigned to the four hardware faders.

Maxx is a digital mixer, so no actual audio is going through the fader controls allowing for complete flexibility for the

hardware faders. Any one of the analog inputs 1-5, digital inputs 1-4 (available on Maxx with AES option), or analog

trim can be assigned to any of the 4 hardware faders.

Setting a Cross point

Rotate the MENU knob to scroll through the matrix. Stop in the matrix, at the intersection of the input channel and

output channel, where you want to send that specific input. Press the MENU knob to cycle through the available cross

points, which are:

• Blank – No Assignment

• A – Assign an analog input to a fader

• D – Assign a digital input to a fader

• T – Trim where the fader knob will work as a hardware trim knob

To turn on the Trim option you need to press the STAR key while in this menu. After the STAR key is pressed you

will be able to cycle through the Trim option.

NOTE: If you are using a multiple-element mic (i.e., stereo, surround, etc.) and you assign all of the channels to

one master fader you need to disable the AutoTrim

function.

Hardware Fader

Number

Input