Specifications

Zaxcom IFB-100 Main Menu
6
Remote Frequency
This menu changes the frequency on the matching transmitter that has the same unit code.
• Press the INC key will increase the frequency.
• Press the DEC key will decrease the frequency.
• Pressing the key will increase or decrease the frequency by .1 MHz
• Pressing and holding the key will increase or decrease the frequency by 1MHz.
REMOTE CH 548.0
UNIT CODE = 1
NOTE: When changing the frequency on the IFB-100 the command is not sent to the transmitter until
you stop on the frequency for 1.5 seconds. You will see a star flash to the right of the frequency when
the command is sent.
WARNING: If the unit code is set to “ALL” you will see a warning and the IFB-100 will not allow you
remotely change frequencies. Because if “ALL” is selected this will cause all your transmitters to jump
to the same frequency.