Specifications

Zaxcom IFB-100 Extended Menu

IFB Jam Threshold

This menu sets how much the timecode has to jump before the IFB-100 is forced to re-jam timecode.

Even though the IFB-100 is constantly re-jamming if the timecode jumps more than the set amount it will

automatically re-jam.

ERX Software Update

This is used to update the software on a Zaxcom ERX receiver.

To Update the ERX Software:

1. With a computer copy the ERX software onto a formatted mini SD card.

2. Place the card in the IFB-100.

3. Set up your ERX to receive programming software (see the ERX manual).

4. Power up the IFB-100.

5. Advance to this menu.

6. Press the INC key.

7. The transmitter will begin to transmit the software to the ERX receiver(s) that is set to receive the

software. The transmitter will continually resend the program until you manually stop it.

Phase Invert Channel

This will invert the phase of channel 2 (Right) audio in on the TA5 connector to correct for a phasing issue.

Encryption Menu

This hides the Encryption Menu.

• HIDDEN the encryption menu doesn’t appear when you cycle through the menu settings.

• ON the Encryption will appear.

ENCRYPTION MENU:

HIDDEN

PRESS TO SEND

ERX PROG FILE

PHASE INVER CH2

OFF

IFB JAM THRESH

1000 MS (DEFAULT)