Specifications

Zaxcom IFB-100 Extended Menu
11
ZaxNet IFB Transmit Frequency
This is where the ZaxNet transmit frequency is set and is the same menu that appears in the Main Menu.
This is the frequency that the IFB-100 will broadcast ZaxNet commands, timecode and ZaxNet audio on.
The ZaxNet transmission from the IFB-100 can be received by Zaxcom TRX transmitters, ERX receivers,
Nomad, QRX receiver with an IFB option board installed, and the Zaxcom Camera Link.
There are 72 choices of frequencies from 2.403GHz - 2.475GHz
IFB Transmit Power
This menu sets the transmit power of the IFB-100’s ZaxNet transmitter.
Power range is 0 through 7 with 7 being the highest
Power-Up Mode
This menu determines if the keys will lock after power-up.
• LOCKED – After power-up has completed, the transmitter will automatically go into Lock Mode to
prevent accidental changes to the settings.
• UNLOCKED – The keys are unlocked upon power-up. You can always lock the keys by going in to the
Lock Screen in the Main Menu.
Unlocking the Transmitter
Simultaneously press the MENU and INC keys.
POWER UP MODE:
UNLOCKED
IFB TX POWER: 7
IFB TX FREQ:
2.420