Specifications

Zaxcom IFB-100 Extended Menu
10
Extended Menu
Navigating the Extended Menu
• Press and hold the MENU key while powering up the unit.
• Pressing the MENU key will advance you to the next menu item.
Exiting the Extended Menu
• Cycle the power
Or
• Hold down the MENU key to get back to the EXTENDED MENU home page then press the INC key.
High Pass Filter Adjust
This menu turns on/off and adjusts the frequency of the high pass filter.
• The high pass filter range is 30Hz to 220Hz in 10Hz increments.
Limiter
This menu enables/disables and adjusts the limiter. The limiter is pre analog to digital converter.
• Range: -2dB to -30dB in 1dB increments.
When the input signal is too high the audio can clip and results in distortion and popping. The limiter
can be used to prevent clipping.
1K Notch Filter
This menu enables/disables the 1K notch filter.
The 1K notch filter is used to eliminate the 1K tone from being outputted to an ERX receiver.
HIGH PASS: OFF
Level when the limiter will act.
LIMITER: OFF
LIMITER: -10dB
FROM FULL SCALE
1K NOTCH FILTER
OFF