User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
98
Input Configure page (Digital Inputs selected)
Page purpose: This page maintains the parameters for the digital inputs. This includes Highpass Filtering, Gain
Trim and Digital Delay.
How to get here:
(MENU key  Input Configure button  Analog Inputs Toggle button {=Digital})
Figure 3-46 Input Configure page (Digital Inputs selected)
Page Notes
None
Page Level Shortcuts
1 – 8 keys – equivalent to pressing one of the Digital (#) buttons, changes to the Analog Input (#) page {p.89}
for the selected channel.
Digital (#) buttons
Pressing it displays the Digital Input (#) page {p.100}. Default settings: HPF Off
(Analog / Digital / Line Lvl) Inputs Toggle button
Pressing it toggles this page between the Input Configure page (Analog Inputs selected) {p.87}, Input
Configure page (Digital Inputs selected) {p.98} and Input Configure page (Line Lvl Inputs selected) (Deva-
16 only) {p.108}.
High Pass Filter button
Each digital input can have a highpass filter applied to it.
Enabling the Highpass Filter
1. Press the High Pass Filter button
The button’s LED indicator flashes green when pressed.
2. Set the Highpass Frequency.
Setting and changing the Highpass Frequency is outlined in the High Pass (#) Hz button {p.99}.
3. Press one of the Digital (#) buttons to apply the highpass filter settings.
The HPF indicator changes to purple with the highpass frequency indicated.
4. Repeat Step 3 for all channels, to enable the highpass filter.
5. Once the last channel has been changed, press the High Pass Filter button again or the ENTER key.
The LED stops flashing.
NOTE: You can use a different frequency for each channel, simply repeat steps 2 and 3 for each channel.
Clear All button
Pressing this button provides a convenient way to clear all the settings, and resets this page back to the factory
default settings.