User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
94
Analog Input (#) – EQ page
Page purpose: Requires EFFECTS PACKAGE – This page maintains the EQ settings for each analog input
channel.
How to get here:
(MENU key  Input Configure button  Analog (#) buttons  EQ button)
Figure 3-44 Analog Input (#) - EQ page
Page Notes
While in this page with the Entry Mode button set to CHANNEL, pressing a number (1 – 8) causes the
appropriate Analog channel EQ to be displayed.
Once all of the parameters for an input have been entered, press the ENTER key. The status indicator (upper
right corner), changes to INLINE, meaning that it is now active. If you press ENTER once again, the status
indicator changes back to BYPASSED, meaning that it is now inactive.
Default settings:
o Band #1 – Type: Lo Shelf, Level: 0.0 dB, Freq: 300 Hz, Q: 1.0
o Band #2 – Type: Peaking, Level: 0.0 dB, Freq: 2000 Hz, Q: 1.0
o Band #3 – Type: Hi Shelf, Level: 0.0 dB, Freq: 5000 Hz, Q: 1.0
o Notch #1 – Type: Off, Level: -96.0 dB, Freq: 60 Hz, Q: 9.9
o Notch #2 – Type: Off, Level: -96.0 dB, Freq: 120 Hz, Q: 9.9
EQ page Level Shortcuts
ENTER key – alternately enables (inline) and disables (bypassed) ALL EQ settings for the current
channel. When a channel's EQ has been bypassed, the settings are still maintained until
they are specifically modified.
RIGHT ARROW key – advances to the next filter band (note the green light in the buttons on the bottom of
the page).
LEFT ARROW key – advances to the previous filter band.
UP ARROW key – changes the current band’s filter type:
o Band 1 – 3 are band filters selectable as Lo Shelf, Hi Shelf, Peaking or Off.
o Notch 1 & 2 are notch filters selectable as Off or On.
U key – resets the Level field of all bands of the current channel to unity (0.0), effectively
negating them.
L key – changes focus to the Level field.
F key – changes focus to the Freq field.
Q key – changes focus to the Q field.
E key – advances to the EQ Memory view.
R key – resets the Level field, Freq field and Q field.
BACKSPACE key – advances to the EQ Memory view.