User`s manual

Zaxcom Deva User’s Manual_______________________________________________________ Chapter 3
87
Input Configure page (Analog Inputs selected)
Page purpose: It sets the parameters of the analog inputs. This includes Mic / Line Level, Highpass Filtering, Mic
Powering, Gain Trim and Digital Delay.
How to get here:
(MENU key  Input Configure button)
Figure 3-41 Input Configure page (Analog Inputs selected)
Page Notes
None
Page Level Shortcuts
1 – 8 keys – equivalent to pressing the appropriate Analog (#) buttons, changes to the Analog Input (#) page
{p.89} for the selected channel.
Analog (#) buttons
Pressing it displays the Analog Input (#) page {p.89}.
Default settings: Line level, HPF Off, 48V Off, Limiter Off
(Analog / Digital / Line Lvl) Inputs Toggle button
Pressing it toggles this page between the Input Configure page (Analog Inputs selected) {p.87}, Input
Configure page (Digital Inputs selected) {p.98} and Input Configure page (Line Lvl Inputs selected) (Deva-
16 only) {p.108}.
High Pass Filter button
Each analog input can have a highpass filter applied to it. You can enable a highpass filter for both line- and mic-
level inputs.
Enabling the Highpass Filter
1. Press the High Pass Filter button.
The button’s LED indicator flashes green while it is active.
2. Set the Highpass Frequency.
Setting and changing the Highpass Frequency is outlined in the High Pass (#) Hz button {p.88}.
3. Press one of the Analog (#) buttons to apply the highpass filter settings.
The HPF indicator changes to purple with the highpass frequency indicated.
4. Repeat Step 3 for each channel you want to change.
5. Once the last channel has been changed, press the High Pass Filter button again or the ENTER key.
The LED stops flashing.
NOTE: You can use a different frequency for each channel, simply repeat steps 2 and 3 for each channel.