User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
84
ZaxNet Setup page
Page purpose: Enables the use of ZaxNet and sets a few operating parameters.
How to get here:
(MENU key  Setup button  ZaxNet button)
Figure 3-37 ZaxNet Setup page
Page Notes
None
Page Level Shortcuts
None
ZaxNet Enable button
When set to On, tells the Deva software to enable ZaxNet functionality and to start communicating with it.
Default setting: Off
Transport Slaved button
When set to On, the appropriate Start / Stop Record commands are sent on ZaxNet to control each
transmitter’s recorder in sync with the Deva starting and stopping recording. Default setting: Off
NOTE: Having the Transport Slaved button turned ON precludes the possibility of recording Talent when they
are not in a Take.
IMPORTANT: In order for this button to function, it is necessary to also have the ZaxNet Enable button set to
On.
Power Roll button
Deva or Fusion can now send Power Roll state info through its timecode output via an attached IFB100 or QRX-
IFB. The Deva’s setting of the POWER ROLL parameter has the following effects:
Always High – send a HIGH POWER state at all times.
Always Low – send a LOW POWER state at all times.
Power Roll – send a LOW POWER state while in STOP mode and a HIGH POWER state while in
RECORD or PLAYBACK mode.
For additional information, see Power Roll feature {p.157}.