User`s manual

Zaxcom Deva User’s Manual_______________________________________________________ Chapter 3

Mix12 Setup page

Page purpose: Enables the use of a control surface with the Deva and sets a few operating parameters.

How to get here:

(MENU key  Setup button  Mix12 button)

Figure 3-36 Mix-12 Setup page

Page Notes

None

Page Level Shortcuts

None

Mix-12 Support button

This button has three settings:

Off – No control surface is connected

Mix12 – A Mix-12 control surface is connected

Mix8 – A Mix-8 control surface is connected

NOTE: After turning On Mix-12 support, you need to cycle the Deva’s power.

NOTE: After disconnecting a Mix-12, you need to cycle the Deva’s power.

Meter Brightness button

Pressing it adjusts the LED brightness on the Mix-12 console. The brightness can be set from 1 (dimmest) to 8

(brightest).

Tone Button Assign button

Pressing it sets the action of the TONE key on the Mix-12 console. The options are:

Tone – Leaves the TONE key assigned to the tone function

Home – Assigns the TONE key to go to the Home page {p.35}.

Escape – Assigns the TONE key to go back one page.

Play – Assigns the TONE key to Play

Unassigned – Disables the TONE key

Fader Channel Assignment button

Pressing it changes the breakout of analog vs. digital channels controlled by the Mix-12 control surface. The

options are:

1-8 A, 1-4 D – Assigns Analog inputs 1-8 to the first 8 channels and Digital inputs 1-4 to the last 4 channels.

1-6 A, 1-6 D – Assigns Analog inputs 1-6 to the first 6 channels and Digital inputs 1-6 to the last 6 channels.

1-4 A, 1-8 D – Assigns Analog inputs 1-4 to the first 4 channels and Digital inputs 1-8 to the last 8 channels.

1-8 D, 1-4 A – Assigns Digital inputs 1-8 to the first 8 channels and Analog inputs 1-4 to the last 4 channels.