User`s manual

Zaxcom Deva User’s Manual_______________________________________________________ Chapter 3
47
Output Mix page
Page purpose: This page routes the 8 analog inputs and 8 digital inputs directly to the outputs. The analog and
digital outputs for each channel receive identical signals. This can be used to feed monitors, video recorders,
Comtek transmitters, Ear Wig feeds, additional analog or digital recorders or any other device that accepts the
signals.
How to get here:
(MENU key  Output Mix button)
Figure 3-7 Output Mix page
Page Notes
In this page, the top line shows the 8 available input channels (In1 – In8) plus the slate mic and the tone
generator. The vertical line of numbers on the right shows the 8 available output channels. The bottom row of
buttons controls the parameters of the matrix selections.
In Figure 3-7 {above}, pre-fader analog input #1 is routed to output #1 (i.e. Boom-1), pre-fader analog input #2
is routed to output #2 pre-fader (i.e. Boom-2) and the ten track mix, consisting of post-fader analog inputs 1 – 8
and pre-fader digital inputs 1 and 2, are routed to Output #3 (i.e. the Director’s feed).
Page Level Shortcuts
None
Output Mix matrix buttons
They connect the Input Channel to the appropriate Output Channel(s).
Pressing one of the buttons cycles through the available choices, based on the setting of the (Analog / Digital) In
Toggle button, Phase Invert button and (Pre- / Post-) Fader button.
Indicator
Description
Black A
Analog input post-fader
Black A with Line
Analog input post-fader with signal phase inverted
White A
Analog input pre-fader
White A with Line
Analog input pre-fader with signal phase inverted
Black D
Digital input post-fader
Black D with Line
Digital input post-fader with signal phase inverted
White D
Digital input pre-fader
White D with Line
Digital input pre-fader with signal phase inverted
Table 3-4 Indicator Descriptions
Slate buttons
Pressing one of them selects / deselects (indicated by an X) sending the slate source on the associated path.
Tone buttons
Pressing one of them selects / deselects (indicated by an X) sending tone on the associated path.