User`s manual

Chapter 10______________________________________________________Zaxcom Deva User’s Manual
176
Line In / Camera Connector (Hirose-10)
No matter which unit you are operating, the “far end” of the cable has to be connected to an audio source or an
audio sink.
If you are connecting a Deva-5.8 to a camera with another 10-pin Hirose connector, well that’s all you need. Just
be sure that the pin-outs on the camera side match the pin-outs below.
If you are connecting a Deva-5.8 to a camera which has only 3-pin XLR connectors, obviously then the description
and Notes column indicate which pin of which XLR connector is connected to that wire.
If you are connecting a Deva-16 to several mics (up to 4) through this connector, obviously your only option is to
use 3-pin XLR connectors.
Deva-5.8
The Camera connector is provided as a camera output and a camera return into the recorder. The camera
returns on pins 5 and 7 are summed to mono. {Connector P/N: RM15TPD-10P(71)}
Deva-16
The Line In connector provides line-level inputs 9 – 12. {Connector P/N: RM15TPD-10P(71)}
Figure 10-6 Hirose-10M Line In / Camera Connector Pin Numbering
Pin
DESC
1
Ch09 (Ch1), Pin-2
2
Ch09 (Ch1), Pin-3
3
Ch10 (Ch2), Pin-2
4
Ch10 (Ch2), Pin-3
5
Ch09 (Ch1), Pin-1
Ch10 (Ch2), Pin-1
6
Ch11 (Ch3), Pin-2
7
Ch11 (Ch3), Pin-3
8
Ch12 (Ch4), Pin-2
9
Ch12 (Ch4), Pin-3
10
Ch11 (Ch3), Pin-1
Ch12 (Ch4), Pin-1
Deva-16 (Input) Deva-5.8 (Input & Output)
Table 10-6 Hirose 10-Pin Description
NOTE: In the Description and Notes columns above, the reference to “Pin-?” refers to connections to industry
standard 3-pin XLRs, which are described in Analog Input / Output Connectors (XLR-3) {p.174}
Pin
DESC
Notes
1
Ch05, Pin-2
Output #1 to camera (Pin-2)
2
Ch05, Pin-3
Output #1 to camera (Pin-3)
3
Ch06, Pin-2
Output #2 to camera (Pin-2)
4
Ch06, Pin-3
Output #2 to camera (Pin-3)
5
Camera return 1
Summed to mono with camera return 2
6
NC or +12v
optional 12v
7
Camera return 2
Summed to mono with camera return 1
8
NC or TC
optional TC
9
NC or Gnd
10
NC or Gnd