User`s manual

Zaxcom Deva User’s Manual______________________________________________________Chapter 10

173

Chapter 10 – Connector Pinouts

This section provides the pinouts for the connectors on the Deva. The mating cable connector part number is

also provided for the less common connectors.

NOTE: All of the diagrams in this chapter show the solder side of each connector.

Power Connector (XLR-4)

The Power Connector on the Deva is a standard 4-pin XLR connector (A4F) available at most electronics stores.

The Deva requires a power source of 9.5 to 18 VDC @ 1 A.

3 2

4 1

Figure 10-1 XLR-4F Power Connector Pin Numbering

Description

Ground

Output: +12 VDC, Max: 3A

Input: 9.5 to 18 VDC (+)

Table 10-1 XLR-4F Pin Description

NOTE: Pin-3 is connected to the battery. If there is no battery, no power is available. It can handle up to a 3 A

load. It IS controlled by the main power switch.

The key thing to remember here is: If you plan on running from a cart power supply and you wire up to use

pin-3, the internal battery will be run down before you might need to use it! So, reserve it for bag use only!

Headphone Output Connector (1/4” stereo plug)

(need art for 1/4" stereo plug)

Figure 10-2 Headphone Plug Connections

Description

Tip

Channel A

Ring

Channel B

Sleeve

Ground

Table 10-2 Headphone Plug Pin Description