User`s manual

Zaxcom Deva User’s Manual_______________________________________________________Chapter 8
165
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List {p.159}
Thresh button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc button and Dec button.
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List {p.159}, with the following exception(s):
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
Ratio button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc button and Dec button.
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List {p.159}
Gain button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the Inc button and Dec button.
Clicking it a second time opens it for direct access.
See: Common Data Entry Field Shortcuts List {p.159}, with the following exception(s):
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
(Analog / Digital) Input (#) – EQ page Shortcuts
ENTER key – alternately enables (inline) and disables (bypassed) ALL EQ settings for the current
channel. When a channel's EQ has been bypassed, the settings are still maintained until
they are specifically modified.
RIGHT ARROW key – advances to the next filter band (note the green light in the buttons on the bottom of
the page).
LEFT ARROW key – advances to the previous filter band.
UP ARROW key – changes the current band’s filter type:
o Band 1 – 3 are band filters selectable as Lo Shelf, Hi Shelf, Peaking or Off.
o Notch 1 & 2 are notch filters selectable as Off or On.
U key – resets the Level field of all bands of the current channel to unity (0.0), effectively
negating them.
L key – changes focus to the Level field.
F key – changes focus to the Freq field.
Q key – changes focus to the Q field.
E key – advances to the EQ Memory view.
R key – resets the Level field, Freq field and Q field.
BACKSPACE key – advances to the EQ Memory view.
While the Entry Mode button is set to LVL/FREQ, the following keys are active:
2 key – adds 0.4 to the Level field.
8 key – subtracts 0.4 from the Level field.
6 key – adds 200 to the Freq field.
4 key – subtracts 200 from the Freq field.
Level field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}, with the following exception(s):
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.