User`s manual

Zaxcom Deva User’s Manual_______________________________________________________Chapter 8
161
F3 key – (first press) displays the False Start dialog {p.139}.
(second press) closes the False Start dialog without doing anything to the dialog.
F4 key – (first press) displays the Timecode page {p.57}.
(second press) displays the Timecode Diagnostics page.
F5 key – displays the Scene Take Note page {p.131}.
F6 key – (first press, if Fader-8 assigned) displays the Headphone Volume page {p.138}.
(next press) displays the Headphone Mix page {p.75}.
(next press) return to previously displayed page.
F7 key – displays the Meter Labels page {p.69}.
F8 key – edit the Scene button in the Scene Take Note page {p.131}.
F9 key – edit the Take button in the Scene Take Note page {p.131}.
F10 key – edit the Note button in the Scene Take Note page {p.131}.
INS key – displays the Home page {p.35} from anywhere.
0 – 9 keys – displays the Enter Segment data entry field, {p.37}. Type the remainder of the number and
press the ENTER key. Once entered, the system attempts to move to the day’s recording, by
the segment # entered. If the number entered is too high, the last available segment is displayed.
M key – toggle Mix-12 meters between prefader input level and the disk mix.
Arrow keys – navigation in pages.
Boot-up Shortcuts
Page Level Shortcuts
MENU key – Press and hold it to pause the startup sequence until you release it, allowing you to read all of the
information.
Boot Keys
Hold down one of the following keys during bootup to change the Deva’s behavior:
F6 key – causes the Deva (v6.06C or later) to reconstruct corrupted folders. This should allow folders to
be mirrored in a normal way.
0 key – forces 48 kHz mode (in v3.56 and later) (also forces Deva to read corrupted folders).
9 key – enables 192 kHz recording speed. This is somewhat obsolete. The current approach is to run
the DSP in fast mode and enable the 192 kHz selection.
STOP key – forces a factory restore to defaults.
Home page Shortcuts
Using the Deva front panel:
ENTER key – (hold for 1 second) Lock the touchscreen.
o MENU key – press to unlock the touchscreen.
F1 key – go to the Cue Mode page {p.127}.
F2 key – flags the currently displayed Take as a “CIRCLE TAKE”.
F3 key – (first press) displays the False Start dialog {p.139}.
(second press) closes the False Start dialog without doing anything to the dialog.
F4 key – (first press) go to Timecode page {p.57}.
(second press) go to the Timecode Diagnostics page.
F5 key – go to Scene Take Note page {p.131}.
F6 key – (first press, if Fader-8 assigned) go to Headphone Volume page {p.138}.
(next press) go to Headphone Mix page {p.75}.
(next press) return to previously displayed page.
Pressing a Recording channel for about 2 seconds – solos that channel to the headphones, the Headphone
button displays SOLO, the left and right headphone channels display the solo’d track and the
other track audio bars are grayed out.
o Pressing any other track SOLOs that track. The left and right headphone channels display the solo’d track’s #.
o Pressing the Headphone button, cancels the SOLO.
ENTER key – (press for about 2 seconds) to lock the touchscreen (press the MENU key to unlock).
SHIFT key+Recording channel – arms / disarms the track that was touched. A disarmed track has a line
through it long wise and the bar indicating the audio level changes to Blue.