User`s manual

Chapter 5_______________________________________________________Zaxcom Deva User’s Manual
152
2. Use the on-screen fader to adjust the volume.
Load a Factory Preset
To load a factory preset, perform the following:
1. Display the Headphone Mix page {p.75} by pressing:
the HEADPHONE key on the front panel, or
the Headphone button on the Home page {p.35}, or
the Head Phone Mix button on the Main Menu page {p.40}.
2. Press the Factory Presets button on the Headphone Mix page {p.75}.
3. Press one of the Preset (#) buttons on the Factory Presets page {p.78}.
Build Your Own Headphone Mix (Working Preset)
On this page, all armed tracks have Blue numbers and all disarmed tracks have Black numbers and a Red slash
through the button.
To build your own headphone mix, perform the following:
Press the button in the left or right headphone output to assign that headphone output channel.
(An X is placed in the button.)
Invert Phase
If for some reason, you need to invert the phase on a channel (M/S monitoring, etc), use the Phase Invert button
on the appropriate channel(s). (The Deva displays a bar on top of the X, indicating the channel’s phase is
inverted.)
IMPORTANT: Invert Phase only inverts the playback phase; it does not affect the recorded audio in any way.
Retaining Your Headphone Mix with a User Preset
In a lot of cases once you have setup monitoring options, you don’t need to change them that often. But once
changed, the Deva allows you to restore those settings with the press of a button. When stored, these become
known as User Presets.
Storing the Mix in a User Preset
You can have up to 12 presets. To store a preset, perform the following:
1. Press the User Presets button on the Headphone Mix page {p.75}.
2. Press the Load/Save Toggle button at the bottom to change the title to Save User Preset.
3. Press one of the unassigned Preset (#) buttons on the (Load / Save) User Presets page {p.79}.
(The Keyboard page {p.135} is displayed to aid in entering the Preset button’s name.)
4. Enter the name (maximum 8 characters.) and press the ENTER key.
NOTE: The preset name does not immediately appear on the button. However, the next time you go into the
(Load / Save) User Presets page {p.79}, the name will appear on the button.
5. Press the MENU key to return to the Headphone Mix page {p.75}.
(The preset # and the name you entered appear below the page title.)
The User Preset number and the user entered name also appear on the Home page {p.35} in the Headphone
button.
Loading a Mix Saved in a User Preset
To load a preset, perform the following:
1. Press the Headphone button on the Home page {p.35}. (The Headphone Mix page {p.75} is displayed)
2. Press the User Presets button (The (Load / Save) User Presets page {p.79} is displayed.)
3. Press one of the Preset (#) buttons with the preset you want to use. (The LED in the upper left corner turns
green.)
4. Press and hold the MENU key until you return to the Home page {p.35}.
Camera Input (Deva-5.8 only)
To switch between listening to the mix and the camera return, press the F3 key on the keyboard at any time.