User`s manual

Zaxcom Deva User’s Manual_______________________________________________________ Chapter 3
127
Cue Mode page
Page purpose: This is the main playback page. It has several uses:
playback a Take for purposes of reviewing it for usability
playback a Take to answer a question for another Take
playback a Take from a wireless that had a “Hit”, to re-record it
playback a Take for the purpose of re-mixing it
To that end, you can select a Take by segment (index) number, timecode or to just Fast Forward or Fast
Reverse. When you playback on Deva you do not have to re-cue to where you where recording. You can hit
record at anytime without fear of erasing a previously recorded Take.
How to get here:
(CUE key)
(MENU key  Cue Mode button)
Recorder view Wireless view
Figure 3-67 Cue Mode page
Page Notes
If ZaxNet has not been enabled, the following buttons are disabled (grayed-out):
Set ZaxNet UB button
Wireless ReRec button
Wireless Audition button
Page Level Shortcuts
0 – 9 keys – opens the Enter Segment data entry field. Type the remainder of the number and press the
ENTER key. Once entered, the system attempts to move to the day’s recording, by the segment #
entered. If the number entered is too high, the last available segment is displayed.
Enter Segment data entry field
This field only appears on top of the Disk icon after a number has been entered. This field is tied to the audio
recording segment displayed in the Cur field of the Cur Segs Folder button.
Enter Segment data entry field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Mode Status button
(Figure 3-67 {p.127} displays STOP)
Located at the top of the page, it displays the current operating mode (RECORD, PLAY or STOP).
Pressing this button from here, takes you to the Main Menu page {p.40}. From any other page, pressing the
Mode Status button (or the MENU key on the front panel) takes you back one level.