User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
100
Digital Input (#) page
Page purpose: This page maintains several parameters for each digital input channel.
How to get here:
(MENU key  Input Configure button  Analog Inputs Toggle button {=Digital}  Digital (#) buttons)
Figure 3-47 Digital Input (#) page
Page Notes
None
Page Level Shortcuts
1 – 8 keys – the same as clicking on analog channel buttons 1 – 8.
D key – goes to the Digital Input (#) – Dynamics page {p.102} for the current channel.
E key – goes to the Digital Input (#) – EQ page {p.104} for the current channel. This functions the same
as the EQ key on the Mix-12.
B key – goes to the Digital Input (#) – BUS page {p.107} for the current channel. This functions the
same as the BUS key on the Mix-12.
Delay button
Press it to enter a value for the duration of this input’s delay.
(Valid range: 0 – 40 ms, Value step: 1)
Delay button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
HPF button
Press it to enter a value for the cutoff frequency for this input’s high-pass filter.
Off
(Valid range: 30 – 240 Hz, Value step: 1)
HPF button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Trimmer graphic fader
It sets the pre-amp level for this channel to optimize this channel’s performance. If you look at the bottom of the
fader background, you’ll see the numeric representation of the slider’s position, within 0.25 dB. This makes it easy
to repeat a setting, if necessary. (Valid range: -20 – 0 – +30 dB, Value step: 0.25)
NOTE: The scale is NOT dBFS and it is NOT dBu. It is a purely relative comparison to the input value arriving
at the fader.