User's Manual
Table Of Contents
- PR6BFI
- Home Screen
- Main Menu
- Extended Menu
- Entering and Navigating the Extended Menu
- Exiting the Extended Menu
- 1K Notch Filter
- Record Format
- IFB Transmit Power
- IFB Mode
- IFB Voting Enable
- ZaxNet Receive Frequency Set
- ZaxNet Transmit Frequency Set
- Transmitter Remote Roll Enable
- Power Roll
- IFB Dropout Compensator
- Power-Up Mode
- SD Card Format
- TC Jam Mode Select
- Time Code Source
- Mute Time Code Transmission Until Jammed
- Group ID Select
- Audio Input Select
- Minimum Frequency
- Maximum Frequency
- Allow IFB Remote Control
- ERX Software Update
- Automatic Record On Boot up
- Input Phase Invert
- Home Screen Time Code Display
- Backlight Timer
- Encryption Menu Hide
- Encryption Code Set
- Firmware
- Wiring Diagrams
- Product Support
- Specifications
- Zaxcom Warranty Policy and Limitations
Zaxcom PR6BFI Home Screen
Home Screen Operations
From the home screen pressing the INC or DEC key will cycle through the TRX control commands in order. If a
formatted card is inserted the internal recorder will follow this sequence. For example if you send a record
command to the TRX the internal recorder will go into record as well.
The PR6BFI will boot up to “- - - -“ mode where no command is being sent. Press INC and REC will be displayed
and a record command will be sent to the TRX and will put the internal recorder into record mode. To stop,
press the DEC key twice. The PR6BFI will cycle through “- - - -“ then to STOP. Playback would be one more
press of the DEC key.
7