User's Manual
Table Of Contents
- PR6BFI
- Home Screen
- Main Menu
- Extended Menu
- Entering and Navigating the Extended Menu
- Exiting the Extended Menu
- 1K Notch Filter
- Record Format
- IFB Transmit Power
- IFB Mode
- IFB Voting Enable
- ZaxNet Receive Frequency Set
- ZaxNet Transmit Frequency Set
- Transmitter Remote Roll Enable
- Power Roll
- IFB Dropout Compensator
- Power-Up Mode
- SD Card Format
- TC Jam Mode Select
- Time Code Source
- Mute Time Code Transmission Until Jammed
- Group ID Select
- Audio Input Select
- Minimum Frequency
- Maximum Frequency
- Allow IFB Remote Control
- ERX Software Update
- Automatic Record On Boot up
- Input Phase Invert
- Home Screen Time Code Display
- Backlight Timer
- Encryption Menu Hide
- Encryption Code Set
- Firmware
- Wiring Diagrams
- Product Support
- Specifications
- Zaxcom Warranty Policy and Limitations
Zaxcom PR6BFI Extended Menu
01:02:03:01 STOP
RX
2.420 RX STOP
Input Phase Invert
If set to ON the phase of the channel 2 (Right) audio input on the TA5 connector will be inverted to correct for
a phasing issue with the input cable.
Home Screen Time Code Display
This menu will determine if the PR6BFI will display its ZaxNet transmit frequency or time code on the home
screen.
ON - The home screen will display the time code and the recorder status on
the top with the ZaxNet status and audio meters on the bottom. When
recording the ZaxNet status will also flash the time remaining on the card.
OFF - The home screen will display the ZaxNet transmit frequency, ZaxNet
status and recorder status on the top with the audio meters on the bottom.
When recording the ZaxNet status will also flash the time remaining on the
card.
Backlight Timer
The backlight menu sets the function of the backlight. Please note that the power draw of the backlight is very
negligible and will not be putting a high demand on the battery
• OFF - The backlight will remain off.
• ALWAYS ON - The backlight will always stay on.
• 1 - 29 seconds - The backlight will remain on after the last button push for the selected time.
Encryption Menu Hide
This menu allows for the encryption menu to be hidden preventing accidental changes.
• HIDDEN -The encryption menu does not appear when cycling through the menu settings.
• ON - The encryption menu will appear and can be changed.
BACKLIGHT TIMER
ALWAYS ON
HOME TC DISPLAY:
ON
ENCRYPTION MENU:
HIDDEN
PHASE INVERT CH2
OFF
19