User's Manual
Table Of Contents
- PR6BFI
- Home Screen
- Main Menu
- Extended Menu
- Entering and Navigating the Extended Menu
- Exiting the Extended Menu
- 1K Notch Filter
- Record Format
- IFB Transmit Power
- IFB Mode
- IFB Voting Enable
- ZaxNet Receive Frequency Set
- ZaxNet Transmit Frequency Set
- Transmitter Remote Roll Enable
- Power Roll
- IFB Dropout Compensator
- Power-Up Mode
- SD Card Format
- TC Jam Mode Select
- Time Code Source
- Mute Time Code Transmission Until Jammed
- Group ID Select
- Audio Input Select
- Minimum Frequency
- Maximum Frequency
- Allow IFB Remote Control
- ERX Software Update
- Automatic Record On Boot up
- Input Phase Invert
- Home Screen Time Code Display
- Backlight Timer
- Encryption Menu Hide
- Encryption Code Set
- Firmware
- Wiring Diagrams
- Product Support
- Specifications
- Zaxcom Warranty Policy and Limitations
Zaxcom PR6BFI Main Menu
PR6BFI Lock Page
This page enables a lock function to prevent any accidental key presses.
When stopping on this page a countdown clock will begin. After 5 seconds the keys will lock and the
display will indicated that it is LOCKED followed by the time code.
If you exit this screen before the 5 seconds is up the PR6BFI will not lock.
To unlock the PR6BFI
• Simultaneously press the MENU and INC keys.
Or
• Powering down the unit will clear the lock.
Countdown clock starting at 5 seconds
After the transmitter locks
LOCK 5
LOCKED 01:02:34:01
12