User's Manual
Table Of Contents
- PR6BFI
- Home Screen
- Main Menu
- Extended Menu
- Entering and Navigating the Extended Menu
- Exiting the Extended Menu
- 1K Notch Filter
- Record Format
- IFB Transmit Power
- IFB Mode
- IFB Voting Enable
- ZaxNet Receive Frequency Set
- ZaxNet Transmit Frequency Set
- Transmitter Remote Roll Enable
- Power Roll
- IFB Dropout Compensator
- Power-Up Mode
- SD Card Format
- TC Jam Mode Select
- Time Code Source
- Mute Time Code Transmission Until Jammed
- Group ID Select
- Audio Input Select
- Minimum Frequency
- Maximum Frequency
- Allow IFB Remote Control
- ERX Software Update
- Automatic Record On Boot up
- Input Phase Invert
- Home Screen Time Code Display
- Backlight Timer
- Encryption Menu Hide
- Encryption Code Set
- Firmware
- Wiring Diagrams
- Product Support
- Specifications
- Zaxcom Warranty Policy and Limitations
Zaxcom PR6BFI Main Menu
Playback Control
Recorded files can be played back from this page.
The top line displays the current mode of the recorder: REC, PLAY or STOP followed by the time code.
The bottom line contains the current segment number and the audio level.
Playing back from the transport page
• Pressing the INC key while stopped will play the segment that is displayed.
• Pressing the INC key while playing back will jump ahead approximately 2 minutes.
• Press and holding the INC key will advance to the next segment.
• Pressing the DEC key while playing back will stop the playback.
• Holding the DEC key while playing back will take you to the start of that segment.
• Pressing the DEC key while stopped will jump back a segment.
Time Code Routing
The time code routing menu sets the function of the BNC time code connector.
• OUTPUT - ThePR6BFI will output time code on the BNC connector.
• INPUT - The PR6BFI will receive time code on the BNC connector.
Time Code Frame Rate Select
The time code frame-rate that will be recorded and transmitted over ZaxNet is set from this menu.
The PR6BFI will lock to and transmit all standard time code frame rates.
• 23.98, 24, 25, 29.97DF, 29.97DF, 30 DF, 30 NDF
IFB Audio Adjust
The IFB audio mix sets what audio will be transmitted from the PR6BFI via ZaxNet.
• RIGHT ONLY - Right inputted audio only will be transmitted.
• LEFT ONLY - Left inputted audio only will be transmitted.
• LEFT AND RIGHT - Both Left and right audio will be summed to mono and transmitted.
TIMECODE 23.98
GEN 01:02:34:01
IFB TX MIX:
LEFT AND RIGHT
TC CONNECTOR:
OUTPUT
PLAY 01:02:34:01
001
11