0
V1100 User Manual - CONTENT Safety Instruction ……………………………………………………………………………….…...1 Minimum System Requirement & Product Feature ……………………….……………….……..3 System Requirement ........................................................................................................................ 3 Product Feature ……………………….…….………….…………………………………………..4 Main Page………………………...…………………………………….……………………………..5 Basic Setup ....................................................................................................
V1100 User Manual Safety Instruction Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
V1100 User Manual In case of a breakdown In case of system breakdown, discontinue use and contact your authorized dealer. In case of abnormal operation If the unit emits smoke or an unusual smell, If water or other foreign objects enter the cabinet, or If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact your authorized dealer or the store where you purchased the product.
V1100 User Manual Minimum System Requirement & Product Feature System Requirement For normal operation and viewing of the Video Server, it’s recommended that your system meet these minimum requirements for proper operation: Item Requirements CPU Minimum Intel® Core 2 Duo or higher (Core i3 or above is recommended) Graphic Card 256 MB RAM graphic cards (or equivalent on-board graphic cards) RAM Minimum 1 GB of RAM,(2GB or above is recommended) Operating System Window 2000, 2003, XP, Vista or Windo
V1100 User Manual Product Feature SYSTEM Resolutions Compressing format Max Frame Rate NTSC: 704x480 PAL: 704x576 H.264 / MPEG-4 / Motion JPEG 30fps (NTSC) 25fps (PAL) Rotation: Mirror, Flip, Mirror Flip Image settings Brightness / Contrast / Saturation / Hue Overlay capabilities: time, date, text and privacy image Image snapshot Yes Video Recording Yes Full Screen Viewing Yes Digital Zoom Audio 10x digital Two-way (full / half duplex) with built-in microphone Audio compression: G.
V1100 User Manual Main Page Toolbar of Main Page 5
V1100 User Manual Client Setting Profile Click the drop-down menu to choose video compression mode of Live View among H.264, MPEG-4, MJPEG and 3GPP. Note: As long as the operating system is not able to afford loading under H.264 mode, please downgrade the mode to MPEG-4 or MJPEG. View Size Select the desired view size of image resolution between Fit Screen and Full Screen. Protocol Select the transferring protocol among TCP, UDP, and HTTP. Turn the Video Buffer function On / Off.
V1100 User Manual PTZ Click the Home button and it brings you back to the center no matter what position you are at. Move the camera view to the direction that the various arrows you click on. Preset Patrol Zoom Focus Use the various direction arrows to steer the camera view to the required position, and name it for the specified position. Before starting this function, it requires to specify Guard tour settings in the Setting. Click & to adjust the digital zoom range.
V1100 User Manual Basic Setup Account Account List The device default account and password setting is “admin / admin”. That means everyone who knows IP address can access the device including all configuration. It is necessary to create a new password if the device is intended to be accessed by specific ones. Click “Add” to create the accounts to the specific users. There are 1 default account and 9 accounts that you may assign 3 different viewer modes as you wish.
V1100 User Manual Network TCP/IP Internet Protocol Version 4 (TCP/IPv4) Obtain an IP address automatically (DHCP): If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically. Use the following IP address: Select this option when the fixed IP address is set. IP address: Enter the IP address of the device. Subnet mask: Enter the subnet mask.
V1100 User Manual PPPoE If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification function at the same time. IP address: The IP address obtained at the PPPoE connecting with network. User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters.
V1100 User Manual Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server. Primary DNS server: Enter the IP address of the primary DNS server. Secondary DNS server: Enter the IP address of the secondary DNS server. Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to-Point Protocol frames insider Ethernet frames.
V1100 User Manual Date Time Current Date / Time It displays current time and date of Video Server and PC that you connected, and you may select the Date/Time format as you wish in the drop-down menu. Note: If you would like the Date / Time information shows on the Live View screen, please check “Basic Setup →Video →Overlay → Overlay Type → Time Stamp” and save the setting. Synchronization Method Keep current setting: Select this mode to keep the current date and time of this Video Server device.
V1100 User Manual Video Video Setting Image Video clip format: Select RECORDING compression format H.264、MPEG-4、MJPEG、3GPP . Profile1 (H.264): H.264 provides higher compression rate than MPEG-4. Thus, H.264 can decrease the bandwidth usage and further apply on 3G. However, H.264 will occupy more system resources than MPEG-4. As long as the operating system appears operating difficulties under H.264 format, please change to select MPEG-4.
V1100 User Manual Click “Add” and a setting pop-up window comes out. A translucent rectangle is located at up left of the image, drag it to where you wish to cover and resize it. Enter a descriptive name, select the color and enable it then save. Profile There are four stream profiles available for quick set-up. These settings can be adjusted, click the profile you appoint to modify and click “Edit” to do the further setting. Each profile has a descriptive name, describing its usage and/or purpose.
V1100 User Manual Audio Input Select the microphone input gain value you wish in the drop-down menu, and based on your region to select the proper codec and save all settings. G.711 U-law : one codec for “Computer Audio”, used in North America & Japan areas. G.711 A-law : another codec for “Computer Audio”, used in Europe and the rest of the world. AMR Audio: an audio codec of the third generation communication for mobile phone.
V1100 User Manual PTZ Setting Patrol Setting You may set the speed of digital pan/tilt/zoom, and also speed for preset/patrol. The range goes 1-100(slow to fast). Control Panel This can be set up the selected view area in every profile. Besides the viewing window there is a PTZ control panel to go to the direction you want. Preset Position In this section, up to 128 Pan / Tilt and Zoom positions can be saved, as well as the home position, which the device faces to when the power is turned on.
V1100 User Manual Playback Client PC This is for uploading the recorded file saved in the PC and play back to see the video.
V1100 User Manual Network Storage Network storage provides the storage function for saving image files to the specified computer and folder connected with the operating computer. Before using this function you must go to Event Server in Event to configure all settings and make the recording file saved here. Local Storage Memory card provides local storage function for saving image files to the specified SD card in the device.
V1100 User Manual SD Card Make sure to insert the SD Card first then click “on”. Create a folder name for event server in SD Card. Optional selection for overwrite the previous file or not, if not, you may set a warning when the capacity below the following percentage:5%, 10%, 25% and 50%. Event List Event List General Name the event file and make it on or off.
V1100 User Manual Action There are multiple choices for action taking which is optional for user to select all of them or part of them: Send Image、Send Notification、Activate Digital Output、PTZ Action. Send Image: You may set up where the image sent to, options like event server and SD card. You must configure it first, please refer to Event Server. Send Notification: Firstly got to HTTP server configure the HTTP server URL, port, User ID, Password, and Proxy server settings.
V1100 User Manual Motion Detection Motion Detection Add the motion detection zone and name it, you can adjust the zone of detection with the mouse. There are 10 for detection zone at maximum. The bar on the top of motion detection area is red when the alarm is triggered. Threshold: Set the threshold of the alarm in the motion detection zone. The higher threshold is, lesser detections can be triggered. Sensitivity: Set the sensitivity for motion detection zone.
V1100 User Manual Firmware upgrade Update the device software. Click “Browse” and select the file for updating. A confirmation dialogue will appear. Click “OK” to start. This Video Server will reboot upon completion. Date Time Please refer to p.12 Security Account Please refer to p.8 IP Address Filter Once enabled it, the listed IP address are allowed or denied access to the product. Add the IP Address that you’d like to allow or deny and select allow or deny from the list and save it.
V1100 User Manual Network Basic Please refer to p.9~11 Network Advanced RTSP General RTP Port Range: The default value of port range is 5000 ~ 7999 and can be changed from 1124 to 65534. RTSP Port: The default value is 554. If the Video Server connected with router and installed outside are over 2 sets and all of them need support RTSP, please fill the value in the blank space in the range from 1124 to 65534. RTSP Configuration Configure the RTSP by profile, then enable or disable the authentication.
V1100 User Manual Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers. Device Name: Enter Device Name you wish. Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www.apple.com/support/downloads/bonjourforwindows.
