Installation guide

8
Step 4. User can configure Date/Time settings of the NVR. After finish the Date/Time settings,
please press “Apply” to save user’s changes and proceed to the next step.
 Adjust Time : Click on the column and the Calendar will pop up on screen for user to
adjust the system date and time. Click Apply to enable the settings.
 Time Zone: Set the time zone that the NVR adjusts to when updating from the time
server.
 Date Format: Select date format from DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD.
 Time Format: Select time format between 12 Hours and 24 Hours.
 NTP On/Off: To enable or disable NTP synchronization.
Step 5. After press “Apply” button, the NVR will start to scan the LAN environment to search
for the specific IP cameras.