Installation guide

7
Step 2. Device setting:
 Device name: User can change the device name.
 Language: User can select the desired display language.
 Enable authentication: User can select enable or not.
 Keep recorded data in hard disk: User can select to keep or not.
 After finish the device setting, please click “Next” to the next page.
Step 3. User can configure network settings for WAN and LAN.
 The connection of the LAN port is for IP cameras. The connection of the WAN port is for
the NVR to Internet.
 The NVR provides the options for user to access to the NVR through DHCP, Fixed IP or
PPPoE. Select the option user would like to use to enable and configure the settings.
 When the LAN port of the NVR is connected to IP cameras via a hub, user can choose
DHCP or Fixed IP to enable and configure the settings.
 After finish the network settings, please press “Next” to the next page.