Installation guide

4
Install the HDD and connect all cables
1. Remove all the screws on the rear panel.
2. Slide out the top cover.
3.Slide in HDD.
4. Use the screws attached in accessory to
mount HDD with the bracket.
5. Connect SATA connection cable & SATA
power cable to HDD.
6. Slide in the top cover.
7. Fasten screws on the rear panel.
For easier installing HDD, you may cut
off the cable ties and connect SATA
cables to the HDD number 1 first and
then connect to the HDD number 2.
VGA screws are attached in the accessory.
Please fasten VGA screws before connecting
the monitor to the VGA output