User manual

F531E & F731E User Manual
Security setting: Tick SSL box if the mail server you use has security
restriction.
Note:
If you use g-mail as your mail server, you should set 587 as your port
number and tick SSL box.
 Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
 On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
 SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
 POP before SMTP: Select if POP before SMTP authentication is necessary
when an e-mail is sent.
Note：
When you set to On, be sure to select either or both SMTP or / and POP
before SMTP.
 POP server name: It is necessary when the POP before SMTP is
selected in Authentication. Type the POP (receiving mail) server name
up to 64 characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends e-mails
performs authentication using the POP user account.
 User name, Password: Type the user name and Password of the user
who has the mail account. This setting is necessary when the SMTP
server which sends e-mails performs authentication.
 Recipient e-mail address: Type the recipient e-Mail address up to 64
characters. You can specify up to three recipient E-mail addresses.
 Administrator e-mail address: Type the Administrator e-Mail address up
to 64 characters. This address is used for reply mail and sending system
messages from the SMTP server.
 Subject: Type the subject/title of the e-Mail up to 64 characters. With
respect to mail which is sent according to the alarm detection when Alarm
sending of the alarm tab is set to On, the characters standing for the sensor
type added to the subject.
 Message: Type the text of the E-mail up to 384 characters. (A line break is
equivalent to 2 characters.)
49