User manual

F531E & F731E User Manual

8.2. SMTP

Set the SMTP menu when you want to send an image via e-mail. By using Mail

(SMTP) function, you can send a mail with attached image file which has been

shot linked with the external sensor input or with the built-in motion detection

function. The image file can also be sent periodically. E-Mail (SMTP) setting menu

is composed of three tabs, General, Alarm sending and Periodical sending.

8.2.1. General

Select On when you use the SMTP function. The common setting options are

displayed below. Select Off, if you do not wish to use the e-Mail (SMTP) function.

Note :

The Setting of general part will be the same as the setting of IP Notification

(Please check “Setting → Basic → Network → IP Notification”)

 SMTP server name: Type the SMTP server name up to 64 characters, or

the IP address of the SMTP server.

 SMTP Server Port: You can set port number from 1~65535 according to

your mail server. The default value is 25.